Nine Essential Features to Look for When Buying a Multiple Wave Oscillator Replica

Are you in the market for a functional replica (accurate copy) of the original Lakhovsky Multiple Wave Oscillator? There are various “Multi-Wave Oscillator” devices offered on the internet for sale. Some of them are well built, and many have very little in common with the original devices produced by Georges Lakhovsky between 1933 and 1940.

Several still functional original Lakhovsky MWO devices were discovered in Italy, and through the efforts of two curious engineers Bruno Sacco and Tony Kerselaers, those devices were meticulously analysed and reverse engineered. They published their findings in the e-book “The Lakhovsky Multiple Wave Oscillator Secrets Revealed” (visit their website).

According to their findings, we made a list of nine features critical for achieving the effects of the original Lakhovsky Multiple Wave Oscillator devices:

1) The main resonant frequency of high voltage resonators (coils) is within the frequency range of the original Lakhovsky machines produced by Laboratoires C.O.L.Y.S.A

The high voltage resonator coils should be made in such a way to prevent the formation of electrical corona and the resulting damage to the wire insulation. All of the high voltage cables should be heavily insulated (in the modernised version it is replaced with the coaxial cable with its shielding grounded for safety reasons).

2) Split ring resonators that make up the MWO antenna are made of metal pipes suspended in space to shape and direct the signal radiation lobe towards the opposite antenna

Although planar antennae would work to some extent, their behaviour is different from the tube split-ring resonators. The antennae should be able to be easily rotated into the upper or lower vertical position.

3) The transmitted signal and the reflected signal are reversed in phase 180° to cancel each other in between the antennae

It is crucial for the transmitted and reflected signals to cancel each other thus forming the point of the high scalar potential. The cancellation of signals seems to be one of the fundamental principles of how the Lakhovsky Multi-Wave Oscillators work. If the transmitted and the reflected signals would not cancel each other, the effects of the device would be significantly different from the original MWO.

4) The output voltage potential is adjustable, and the input parameters can be monitored, i.e. input voltage and current

The operator of the device should be able to precisely set the desired operating conditions and monitor the input parameters.

5) The spark gap discharge pulse rate is precisely adjustable and repeatable

The operator should be able to precisely adjust and set the pulse rate while monitoring the spark gap operation through a UV protected control window. Tungsten electrodes should be reliably held and easily replaceable.

6) Cabling is done properly

The cables have to be ozone resistant and also provide an extra element of safety. Internal cabling of electrical mains and HV transformer output sections should be protected from ozone-induced decay. External high voltage cabling is functionally a part of the primary tank circuit, which means that in case of failure of the cable insulation there is an increased risk of accidental electrical shock that could be very dangerous due to a significant amount of energy stored in high voltage capacitors. The quality of grounding and the length of cables determine the shape of the signal envelope, which appears to be a crucial factor in the proper operation of the device.

7) Device enclosure is made of metal and electrically grounded

To reduce substantial radio-frequency interference emitted by the spark gap and to provide safety from any possible electrical shock to the operator, the device should be inside the electrically grounded metallic enclosure. The most suitable way to shield the environment from RF interferences is to use the entirely grounded metallic enclosure.

8) The critical parts/components are robust and durable

All of the critical parts/components should be adequately robust and capable of withstanding any possible electrical extremes to operate reliably for many years, i.e. high voltage capacitors, primary tank wires, spark gap, safety spark gap, high voltage transformer and high voltage resonators

9) The historically used accessories are included with the replica set

The original Lakhovsky Multiple Wave Oscillators were each equipped with a capacitively coupled footplate and hand-held spiral applicators for focusing high-frequency displacement currents to specific treatment areas. They are described in the historical notes as an essential part of the procedures used by Dr Lakhovsky and Dr Vassileff.

Please use this list of essential features as a guideline when evaluating different offers on the market.

33 thoughts on “Nine Essential Features to Look for When Buying a Multiple Wave Oscillator Replica”

  1. Thank you Mr McGregor! It’s great to hear you find this article useful. We have emailed you the pricing information.

Leave a comment

I accept the Privacy Policy

This site uses Akismet to reduce spam. Learn how your comment data is processed.