There is a legend about Christopher Columbus winning a wager against his critics by making an egg stand on its tip. That story is often used to illustrate the fact that it is often simple to understand the discovery after it already happened. That principle is certainly true in case of famous inventor Nikola Tesla who discovered principles of rotating (rotary) magnetic field. His discoveries lead to the invention of the polyphase induction motor. Although Tesla didn’t discover alternating current, he was the first one to effectively harness it and use it to do useful work.
Nowadays virtually all electrical motors used in everyday life are based on the principles of rotating magnetic field in one form or another. When Tesla discovered the principles of rotating magnetic field utilisation he also conceived suitable generators and transformers in order to provide efficient means of distribution of electrical energy and its transformation. Tesla’s system of distribution of polyphase alternating currents is nowadays universally used for transport of electricity from electrical power generators to end-users.
Tesla originally conceived the idea of the principles of the rotary magnetic field in the February of 1882. During that period young Tesla was working as an electrical engineer in Budapest. In his autobiography Tesla wrote:
One afternoon, which is ever present in my recollection, I was enjoying a walk with my friend in the City Park and reciting poetry. At that age, I knew entire books by heart, word for word. One of these was Goethe’s “Faust”. The sun was just setting and reminded me of the glorious passage, “Sie ruckt und weight, der Tag ist uberlebt, Dort eilt sie hin und fordert neues Leben. Oh, da kein Flugel mich vom Boden hebt Ihr nach und immer nach zu streben! Ein schsner Traum indessen sie entweicht, Ach, au des Geistes Flygein wird so leicht Kein korperlicher Flugel sich gesellen!”
As I uttered these inspiring words the idea came like a flash of lightening and in an instant the truth was revealed. I drew with a stick on the sand, the diagram shown six years later in my address before the American Institute of Electrical Engineers, and my companion understood them perfectly. The images I saw were wonderfully sharp and clear and had the solidity of metal and stone, so much so that I told him, “See my motor here; watch me reverse it.”– Nikola Tesla
During the following nine years period Tesla worked on perfecting and improving his innovations in the field of alternating current generation, transportation and utilisation. Tesla’s efforts to commercialise his system subsequently lead to professional confrontation with Thomas A. Edison in so called “War of Currents”. Tesla’s AC system of electrical energy transmission and utilisation proved to be superior to Edison’s direct current system and he eventually won the “war of currents”. Even in the 21st century virtually all electrical distribution networks in the world use Tesla’s discoveries and innovations.
In order to better illustrate underlying concepts and ideas behind his inventions Tesla often resorted to showmanship. Very early on, Tesla realised that engineering diagrams and patents were simply not interesting enough for the majority of people and the same is still true today. During 1890’s and early 1900’s Tesla was renowned for his experiments with electrical currents of high potential and high frequency. He would often let electrical discharges travel over his body, which to most people of his day looked like a miracle.
However his rotary magnetic field concept was somewhat harder to present because magnetic field is not normally visible to a naked eye. Finally, Tesla had a wonderful idea of replacing the rotor of the 2-phase induction motor with a copper egg. In that way copper egg would rotate in the rotary magnetic field in the same way as any rotor in the induction motor would. As the copper egg gained rotational speed it was lifted on its main axis as the consequence of gyroscopic effect. Tesla presented model of his “Tesla’s Egg of Columbus” in 1893 at the World fair exhibition in Chicago. “Tesla’s Egg of Columbus” fast became popular among the visitors of the World fair exhibition for its ingenuity as well as for its aesthetic appearance. Even today “Tesla’s Egg of Columbus” produces a sense of wonder in the people witnessing the effects of the invisible rotating magnetic field. It also proved to be a great educational tool which, in a simple way, conveys basic electro-technical engineering principles to non-engineers.
Contemporary working replicas
Conceptually, the replicas of “Tesla’s Egg of Columbus” are not difficult to reproduce, however they usually deviate from Tesla’s model in a few important aspects.
First difference is that virtually all reproductions use 3-phase AC windings as opposed to Tesla’s original 2-phase system. Although 3-phase reproductions accurately describe Tesla’s general idea of rotary magnetic field they also represent historical inaccuracy in the technological aspect. The main reason for using 3-phase windings in the reproductions of “Tesla’s Egg of Columbus” is immediate availability of 3-phase AC current which is used virtually everywhere in the world and the possibility to use standard star or delta coil configurations.
Second difference is aesthetical appearance of such modern day reproductions. While it is true that aesthetics of “Tesla’s Egg of Columbus” model is not relevant from the technological point of view, we are of opinion that the true spirit of Tesla’s ideas has been lost. Everything Tesla ever produced for his public lectures and exhibitions always exhibited a high level of craftsmanship and high aesthetical value. In fact, many Tesla’s professional contemporaries lauded his precision, neatness and even beauty of the models he presented. Virtually all modern replicas of “Tesla’s Egg of Columbus” simply don’t have aesthetic finesse of the Victorian era technological devices.
Currently there are only a few existing functional models of the “Tesla’s Egg of Columbus” in the world which exhibit technical as well as aesthetical value in the spirit of Tesla’s original model.
One replica is exhibited in the Tesla Museum in Belgrade, Serbia with the size and shape closest to the original which was exhibited in 1893 at the World fair exhibition in Chicago. Although historically most accurate by its size and shape we find this model simply too modest in its size.
Another model of Tesla’s Egg of Columbus is exhibited in the Technical Museum in Zagreb, Croatia. This model was made as a working prop for the filming of the television series about life of Nikola Tesla, which was filmed during 1970’s in the Yugoslavia. We are much fonder of this version because it is larger than the model exhibited in Tesla Museum in Belgrade. However this replica is of poor quality and craftsmanship, which is understandable considering the period during which it was made and the extremely low budget available at that time.
Two other models of Tesla’s Egg of Columbus are exhibited in Tesla’s Memorial Centre in Smiljan, Croatia and in Historical Museum of Croatia in Zagreb, Croatia. Both of those latest model-replicas were designed and made by Zvonimir Rudomino, the owner of RT17 d.o.o. We are proud to say that they are the largest ones in the world both in their size and weight while at the same time a special care was given to aesthetic details and the conformity to the modern standards of safety.
Production of working replicas
During late 2005 Mr. Rudomino was contacted by the people assigned by Croatian government to design, build and equip new Tesla Memorial Centre in Smiljan that was to be opened in the July of 2006 at the date of Nikola Tesla’s 150th birthday. During the preliminary discussions it was decided that a few working models of Tesla’s inventions should be designed and build. At least four different functional models were to be built by Mr. Rudomino: Tesla’s Egg of Columbus, 2-phase Tesla induction motor, Tesla turbine and Tesla transformer. It was decided that all of the functional models should follow original Tesla’s design as closely as possible, both in technological as well as in the aesthetic details. It was also decided that those functional replicas will have to satisfy all modern safety standards and they would also have to pass safety evaluations by appropriate governmental institution. By that point it was obvious that the technological challenge would be tremendous given the seemingly conflicting requirements. Until March of 2006 no further talks took place and it was becoming obvious that the whole project would probably be cancelled. However, during early March of 2006 another set of talks took place and additional requirements, like automated control of the functional models, were added at the last moment. All of those functional replicas were to be designed from scratch, produced, assembled, tested and approved by authorities in less than four months. Although it was obvious that such task would be an engineering and logistical nightmare, after a brief consideration of all the requirements, we finally agreed and accepted the commissioned job.
During following years several sets of Tesla’s Egg of Columbus were delivered to several customers.
In 2008 we delivered another large Tesla’s Egg of Columbus and large Tesla coil to the Historical Museum of Croatia for their traveling exhibition with the topic of life and work of Nikola Tesla. Due to the lower budget in this case we customised the model to reduce overall cost. This model of Tesla’s Egg of Columbus was made of common types of wood, plywood and copper egg was made by spin-forming rather than by machining. Its simple beauty and attention to details gained attention of visitors of exhibitions in Madrid, Vienna, Bratislava, Helsinki and other cities.
Several smaller models of Tesla’s Egg of Columbus were delivered to educational institutions in Croatia. These models were customised to be very simple in their appearance and with only basic finish in order to minimise the cost.
A few smaller customised models of Tesla’s Egg of Columbus were even delivered to private collectors. In such cases specific design and finish requirements included “rough and worn” finish, very modern looking design of wooden parts and even custom machined copper figurines.
Technological and technical aspects of production
- Wooden parts assembly
From the initial discussions and at the later stages it was decided that the functional model of Tesla’s Egg of Columbus had to be the biggest one in the world. It was also decided that its aesthetical design has to be as close to the spirit of Victorian era as possible, while at the same time modern materials and technologies had to be used in order to meet safety standards and retain financial feasibility.
At the earliest stages of the project we were given permission by the curator of the Technical Museum in Zagreb to closely examine all available original electrical devices from the Victorian era. We wanted to determine what kind of wood was used during that period, what kind of textures it retained and what were the most commonly used paints and lacquers. After careful considerations it was decided that modern composite wooden materials should be avoided because they were simply not available during Victorian era. Proper paints and lacquers were also selected in the way that closely matched wooden finishes that were used in construction of technical devices at the end of 19th century. Another thing to be considered was the durability of the wood from which wooden plate was made because the functional replica is to be used for decades with as less of maintenance as possible. Finally we settled for the exotic wood iroko because of its hardness (historically, early clocks used cogs made from iroko) and the slight level of greasiness. The slight greasiness of the wooden structure should lessen wear of the wooden material if paint and lacquer in the centre of the wooden plate eventually wears down after long time use.
At that point 3D engineering models were made in order to facilitate discussions with the designers regarding the final appearance of the whole model. It was at that point decided that the base of the whole model should be square shaped in order to fit existing exhibit stands in the museum. It was additionally decided that the rectangle shape would be more suitable in order to leave space for patinised brass replicas of the electrical terminals that were at the same time designed and produced for the functional model of the Tesla’s 2-phase induction motor. In that way the apparent symmetry of the whole functional model was broken and additional electrical terminals provided more “life” to the model. Another addition were large wooden stand-offs that effectively raised stator from the base of the model thus allowing easier manipulation of the stator and it also provided additional visual dynamics to the whole model.
Once wooden material planks were acquired, they were machined to fit snugly together and were fastened with wooden “cookies” and special glue. In that way a uniform wooden plate was formed that is very sturdy and it was possible to machine wooden plate from a virtual single piece of wood. Wooden plate was carved by a precise CNC machining process which allowed high precision, reproducibility and prevented forming of “steps” which would cause copper egg to jump during its rotation. Although the most demanding parts of the woodwork were CNC machined, the rest of the work was done manually in order to reduce the total cost of the functional model.
Finally all of the wooden parts were smoothed with a very fine grain sandpaper in order to remove any remaining irregularities and to provide high-quality basis for the painting and lacquering. Since it was decided that all of the wood texture should be visible, in order to keep with the Victorian era designs, the painting was done manually with spirit based paint in the colour tone that was commonly used during late 19th century. The whole process was finalised by spraying several thin layers of modern lacquer which protects paint and wood from the moisture and the influence of UV light. A number of very thin layers of carefully chosen lacquer also provide a “satin” visual effect which closely matches the look of the woodwork on the devices made at the end of 19th century.
The final assembly of the entire woodwork took place just a few days before the opening of the Tesla Memorial Centre in Smiljan. The design at that time proved to be reliable and the woodwork and its finish don’t show any signs of wear in spite of the unfavourable conditions in the Tesla Memorial Centre in Smiljan (high amount of air moisture, low temperatures during winter periods).
- Electrical parts
From the early stages of the project it was decided that the stator of the Tesla’s Egg of Columbus should be made from modern materials in the form that would ensure low core losses and that would provide very high level of mechanical stability and sturdiness. Once we settled with final dimensions of the stator we ordered a custom made, laser cut, transformer steel, tape core from one of the major producers of distribution transformers. The core itself was already quite firmly formed and tightly wound when we received it but we additionally submerged in the special epoxy resin, vacuumed out all of the air bubbles and baked everything for a few hours. At the end of this stage core showed very good electrical and mechanical properties.
The main challenge with this core was its size and weight (> 100 kg) and it had to be manipulated by three people and with the help of a small size hydraulic crane. After the core was initially prepared the layer of the special glass-fibre insulation tape was placed on the core in order to prevent any possible damage to the subsequent layers of the lacquered copper wire (“magnet wire”). Because it was decided to follow Tesla’s original design we had to wound four separate multi-layered sections on the large toroid core and it had to be done manually. It was a tedious job that required three people working simultaneously – two people to manually wind copper wire by manipulating large 20 kg spool and one person to manipulate small crane. The additional obstacle was the fact that additional insulation had to be placed between layers of wire but in the end the stator was wound in less than two days.
Once the core was wound, different sections of the windings were interconnected exactly as in the case of the Tesla’s original 2-phase induction motors. The windings were connected to the 3-phase variable transformer (single phase + two phases connected together) in order to slowly raise the applied voltage and test the windings and core gradually. Finally, the full voltage was applied and everything worked as planned. At that time wooden plate was still in the production stage so an ordinary cardboard plate was improvised and an empty canister of paint was placed in the centre of the stator, slightly above middle plain of the toroid. The can immediately started to turn and gaining speed until it was thrown out of the stator with great force.
After the stator was successfully tested it was time to add one more protective layer of wire in order for the functional model to be able to pass safety examination. So another layer of insulation was placed over entire area of windings. In this case the transformer insulation textile was chosen because it was to be slightly visible and it had to be a material that was similar to the materials used in the late 19th century. When the layer of insulation textile was wound around windings it was several times painted over with a shellac solution in order to give it as much authenticity as possible. While the final layer of shellac was still wet a final, single layer of lacquered copper wire was wound around the whole toroid. That final winding was at one end connected to protective earthing and its sole purpose is to provide additional security if by some mishap outer most layer of the stator is damaged and if anybody touches it directly by naked hand. After the final winding was added, additional seven layers of shellac were painted over the entire stator in order to give it more authentic look (lacquered copper wire weren’t widely used during the period when the original Tesla’s Egg of Columbus was made).
- Copper egg
From the very beginning of the project it was decided that the functional model of Tesla’s Egg of Columbus that was to be exhibited in the Tesla Memorial Centre in Smiljan will have to be the biggest and heaviest one in the world. The main reason for that decision was the fact that functional models would be exhibited in the small house where Tesla grew up and conceived his first innovative ideas. Normally I would produce spun copper egg but in this case I wanted it to be unique so I decided to make it from two halves machined from solid blocks of copper. Each of two halves would then have a thread that allows them to form a single compact unit.
3D engineering models were designed in just a few days. However, determining the proper method of machining proved to be a daunting task. It soon became obvious that 4-axis CNC machine would have to be used for machining (shelling the blocks). The biggest challenge was designing proper holders that would firmly and precisely hold the machined pieces in the correct position. Once the proper holders were designed it took almost 12 hours of slow machining to achieve adequate precision and smoothness of the outer surfaces. The pieces had to be repositioned a few times and precisely aligned and it also contributed to the overall time needed for entire machining process.
Finally, when both halves of the egg were finished the copper egg was assembled. The total weight of the egg was ~1366 – 1387 g. When the copper egg was finally tried out in the rotary magnetic field of the finished stator it was determined that it had a tendency to a slight instability regardless of the gyroscopic effect stabilising it when it rotated at high speed (~3000 RPM). I added three additional lead weights and glued them with epoxy resin inside one half of the egg. The total weight of the assembled copper egg with added lead weights was at this point ~1750 g. It was determined that the end of the copper egg on which it stands during its rotation depends primarily on the position of egg from which rotation started when the stator is turned on (position on the wooden plate and the angle of the egg on all three axis).
Although I considered polishing the copper egg to a high gloss and protecting its surface with a very thin layer of transparent polymer, it was decided to leave surface unprotected in order to allow a slight natural patinisation to form. In that way additional “feel” of antiqueness and authenticity is achieved, the same way as with the other functional models which had their brass and copper parts deliberately patinised.
- Electronics and automationThe final request by the commissioning party was that Tesla’s Egg of Columbus must have interactive qualities. In that sense we designed microcontroller centred system which allows visitors to start the rotation of the egg with press of a button. User is also allowed to select the rotational direction of the egg. We also added keylock which allows demonstrators to switch the system on and off without any restriction. Additional function of the interactive control system is to act as a time limiter which turns off rotational magnetic field in order to allow for time for copper egg to come to a complete rest. The main reason for such decision was to prevent copper egg from changing its position in the centre of the wooden plate. Due to the very powerful rotational magnetic field produced by stator at geometrically and gyroscopically stabile, heavy objects like big copper egg during gain relatively high number of rotation per minute (RPM). At high rotational speeds even relatively small imperfections in shape and balance cause slight eccentricity in the orbital movement of the copper egg. Eventually the eccentric orbital movement of the egg causes it to mildly hit protective wooden rail. At that point the friction between copper egg and the wooden rail causes it to lose rotational speed and it usually continues its movement around the circumference of the protective wooden rail. Although the described effects were present in the original Tesla’s Egg of Columbus, prevention of even the mild bumping between rotating copper egg and protective rail was necessary in order to simplify the process of attaining proper safety certificates.
We feel proud of each model and replica that we ever built because each one serves as a reminder of the contribution Nikola Tesla made in the development of the modern civilisation. The fascination with life, work and ideas of Nikola Tesla steadily grows for the past two decades and deservedly so. Nikola Tesla was a sensitive and eccentric man who fathered modern electrical distribution systems and suitable motors. His experiments with electrical distribution systems based on a resonant single-wire and “wireless” systems were forgotten for decades only to be revived in the various forms in the past two decades. Tesla’s bladeless turbines and other turbomachinery are slowly but steadily being developed and used in all branches of industry. Specially modelled micro-Tesla turbines are even developed and introduced in the field of prosthetic medicine. His ideas regarding cheap and non-polluting energy sources inspire number of professional and amateur researchers. Yet the name of Nikola Tesla is rarely mentioned in textbooks or in popular culture.